** SERCOFIN **SOMOS MERCADO LIDER PLATINIUM / 100% CALIFICACIONES Y OPINIONES POSITIVAS / NUNCA UNA REGULAR / MUCHÍSIMO MENOS UNA NEGATIVA / 100% CLIENTES SATISFECHOS Y CONFORMES / NUNCA UN SOLO CLIENTE INSATISFECHO EN TODO NUESTRO HISTORIAL COMERCIAL / LOS MEJORES DEL SITIO Y MERCADO / LO DICEN LOS MILES DE CLIENTES QUE ATENDEMOS DÍA A DÍA / GRAN LOCAL A LA CALLECOMPRE SEGURO COMPRE EN SERCO-IMPORT , otro departamento de SERCOFIN**CONSULTA Y APROVECHA ABONAR EN 24 CUOTAS CON EL NUEVO SISTEMA MERCADO POINT, SOLO EN SERCO-IMPORT, OTRO DEPARTAMENTO DE SERCOFIN**PROYECTOR VIDEO MAPPING PANASONIC PT-EX16KE 16000 LUMENES 3LCD RESOLUCIÓN XGA 1024X768 CON LÁMPARA, EN CAJA NUEVO! / IMPRESIONANTE EQUIPO ÚNICO EN EL PAÍS !! RESOLUCIÓN Y POTENCIA INIGUALABLE !! PODES PROYECTAR A GRAN ESCALA EN MUROS, EDIFICIOS, EVENTOS , RECITALES, ETC ETC !! NO EXISTE NADA QUE LO SUPERE !!! ESTÁ AL 50% DE SU VALOR REAL DE FACTURA ORIGINAL !! VERDADERA OPORTUNIDAD !! USO PROFESIONAL Y SOLO PARA ENTENDIDOS !!!The Panasonic Europe PT-EX16KE Projector is a XGA Large Venue Projector. This lamp based projector is capable of displaying 16,000 Lumens at its brightest setting with a native resolution of 1024x768 . The internal 3LCD technology is an innovative 3-chip design that sets itself apart by delivering vibrant, true-to-life images with better color brightness and a wider color gamut. The unique projector lens has the ability to be shifted to allow greater flexibility in positioning the projector relative to the screen.General Power 200-240 V AC, 50/60 HzPower consumption 1,850 W (18 W with standby mode)LCD Panel size 46 mm (1.8 inches) diagonal (4:3 aspect ratio)Display method Transparent LCD panel (x 3, R/G/B)Pixels 786,432 (1,024 x 768) x 3, total of 2,359,296 pixelsPixel configuration StripePure color control device 1Lens OptionalLamp 380 W x 4, lamp replacement cycle (lamp power: Normal/Eco1, Eco2): 2,000 hours/3,000 hours*1Screen size (diagonal) 1.02–15.24 m (40–600 inches) (2.54–15.24 m [100–600 inches] with the ET-ELS03), 4:3 aspect ratioBrightness*sup2/sup 16,000 lm (4-lamps, lamp power: Auto/Normal, Optional lens: ET-ELS03)Center-to-corner uniformity ratio*sup2/sup 90%Contrast ratio*sup2/sup 2,500:1 (full on/full off, 4-lamps, lamp power: Auto)Resolution 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)Scanning frequency HDMI/DVI-D Horizontal: 26–80 kHz, vertical: 23–85 Hz, dot clock: 162 MHz or lowerRGB (analog) fH: 15–120 kHz, fV: 48–120 Hz, dot clock: 230 MHz or lower (Signals exceeding the dot clock rate of 165 MHz are downsampled.)YPsubB/subPsubR/sub (YCsubB/subCsubR/sub) fH: 15.75 kHz, fV: 60 Hz [480i (525i)] fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz, fV: 60 Hz [1035/60i] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] fH: 28.13 kHz, fV: 50 Hz [1080/25sF] fH: 27.00 kHz, fV: 48 Hz [1080/24sF] fH: 33.75 kHz, fV: 60 Hz [1080/30sF] fH: 56.25 kHz, fV: 50 Hz [1080/50p] fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080/25p] fH: 27.00 kHz, fV: 24 Hz [1080/24p] fH: 33.75 kHz, fV: 30 Hz [1080/30p] fH: 67.50 kHz, fV: 60 Hz [1080/60p]Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]Optical axis shift With the ET-ELW06: vertical ±39% from center of screen (powered)*3 With the ET-ELW02/ELW04/ELS03/ELM01/ELT02/ELT03: vertical ±39%, horizontal ±10% from center of screen (powered) With the ET-ELS02: vertical ±50%, horizontal ±10% from center of screen (powered) With the ET-ELW03: the optical lens shift function cannot be used.Keystone correction range Vertical: Maximum ±40°, Horizontal: Maximum ±40° (with XGA signal input, for vertical/horizontal correction only, Optional lens: ET-ELS03)Installation Ceiling/floor, front/rearTerminals DVI-D IN (INPUT 1) DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1035/60i, 1080/24p, 1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA (1,920 x 1,200)*4, compatible with non-interlaced signals only, dot clock: 25–162 MHzHDMI IN (INPUT 1) HDMI 19-pin x 1 (compatible with HDCP, compatible with Deep Color), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1035/60i, 1080/24p, 1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA (1,920 x 1,200)*4, compatible with non-interlaced signals only, dot clock: 25–162 MHzANALOG IN (INPUT 1) D-sub HD 15-pin (female) x 1 (RGB x 1)RGB 5BNC IN/ VIDEO IN (INPUT 2) BNC x 5 (RGB/YPBPR/YCBCR x 1), shared with VIDEO IN (BNC x 1) (composite video)S-VIDEO IN (INPUT 2) Mini DIN 4-pin x 1 (S-Video)INPUT3/INPUT4 Optional interface board slot, When the ET-MD16SD1 is installed, SERIAL IN (SDI IN 1/2): BNC x 2 (SD-SDI signal/single link HD-SDI signal) SD-SDI signal (YCBCR 4:2:2 10-BIT): 480i, 576i (SMPTE 259M-C compliant) Single-link HD-SDI signal (YPBPR 4:2:2 10-BIT): 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/25sF, 1080/24p, 1080/24sF, 1080/30p, 1080/30sF (SMPTE 292M compliant) SERIAL OUT (SDI OUT): BNC x 1 (active through)SERIAL IN D-sub 9-pin (male) x 1 for external controlSERIAL OUT D-sub 9-pin (male) x 1 for link controlREMOTE IN M3 Jack x 1 (for wired remote control)LAN RJ-45 x 1 (for network connection, 100Base-TX/10Base-T, compliant with PJLink™ [class1])USB USB type-B (USB connector) x 1*5Cabinet materials Molded plasticDimensions (W × H × D) 650 x 349 x 815 mm (25.6” x 13.7” x 32.1”) (with legs at shortest position, optional lens not included)Weight Approximately 46.5 kg (102.5 lbs) (optional lens not included)Noise level 51 dB (lamp power: Normal/Eco2), 48 dB (lamp power: Eco1)Operating temperature 5°C- 40°C [41°F-104°F] (less than 1,800 m [5,906 ft] above sea level), 5°C- 30°C [41°F-86°F] (between 1,800 m and 2,700 m [5,906 ft to 8,858 ft] above sea level)Operating humidity 20–80 % (no condensation)Supplied accessories Power cord x 1 (x 2 for PT-EX16KE/EX12KE), power cord holder/power cord cover x 1set, wireless/wired remote control unit, batteries (AAA/R03/LR03 type x 2), VGA cable x 1, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software, Real Color Manager Pro.), lens attachment x 1set, lens lock lever fixing bracket x 1set, lightshielding plate x 3set, spacer x 1set, cable tie x 3NOTE *1 The values given for the recommended lamp replacement cycles are maximum.*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.*3 The ET-ELW06 is equipped with only vertical optical axis shift.*4 Compliant with VESA CVT-RB.*5 This port is for use by service personnel only. The USB interface may not operate with all USB compatible equipment.CautionDo not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.NOTES ON USE1 This product must not be used in residential areas.2 This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.3 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping sound, or fail to illuminate, due to impact or extended use.4 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:• Never place objects on top of the projector while it is in operation.• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.• If stacking projector units, care must be taken to provide the recommended space between units. These space requirements also apply to installation where only one projector unit is